Buck converter voltage reducer 10 amp

Buck converter voltage reducer 10 amp A DC to DC regulator with an input voltage of 32 volts

to 60 volts DC Which in the event was circuit Converters 48 to 24V 3A

Is the converter output voltage Flexible and customer orders in the range of 24 volts set in

this model Lowering converter control circuit was added to the load current consumption

can be disposable flow From 0.5 amps to 10 amps well-set topology used in this exchange

of Buck ( BUCK Converter ) It is also a non-isolated power supply so instead

The use of trans predecessor of the thyroid has been used as well as the trans-Pulse Driver

You’ll see a better MOSFET circuit which is used in the photo use
This piece makes optimal waveforms at full load MOSFET circuit that could overheat

Technical specifications Buck converter voltage reducer 10 amp

 range input voltage between 32 to 60 volts DC (the voltage increases or decreases according to the customer’s order)–
The output voltage range between 12 to 30 volts DC (the voltage increases or decreases according to the customer’s order)
The output current of 0.5 mA to 10 mA to 10 mA configurable
fan 24 Volt 40 mm to 40 mm for cooling diodes and MOSFETs
Ability to control the output current for battery charging circuit Constant Current Mode
Or power LED lights
protection against reverse the polarity of the input device
efficiency circuit at worst, and at best 88% 80%
using Litz wire to reduce losses skin
. Using a pulse transformer to drive the MOSFET

Use DIP parts for ease of assembly

This converter is capable of converting the voltages and currents and thus include the following
converting 12V to 5V 10A
Convert 24 volts to 12 volts, 10 amperes
Convert 24 volts to 13. 8 volt 10 amp
converter 48 volts to 12 volts, 10 amperes
converting 48V to 24V 10A
converter 48 V to 36 V, 10 A
converter 60 V to 48 V, 5 A

Below are pictures of the voltage reducer disguised see